Glacier bay M2430-JVM Guía De Uso Y Cuidado

TOOLS REQUIRED
Claw hammer Safety goggles
Measuring tape Wall hardware
Installation
1
INSTALLING THE HANGING BRACKETS
NOTE: Before installing, make sure all parts are present.
Compare parts with the Hardware Included list. If any part is
missing or damaged, do not attempt to install the product.
□ Attach the hanging brackets (AA) to the back of
the mirror using the included screws (BB).
BB
AA
3
INSTALLING THE MIRROR
□ For wall stud installation, insert #12 x 3 in. screws with washers into the
stud locations (not included).
□ For drywall installation, drill holes at the appropriate locations and insert
toggle bolts with washers (not included).
□ For concrete wall installation, drill 1/4 in. holes at the appropriate locations
and insert #12 wall anchors, followed by #12 x 3 in. screws (not included).
□ Once the mounting hardware is installed, hang the mirror from the
hardware using the hanging brackets or the hanging wire (not included).
MG3036-JVO, MG3036-NHK, MC3036-ACO, MAG3036-CHR
Phillips screwdriver Power drill
Level
2
M2430-JVM, MAM22-CHT, M2430-JVO, MAA2431-CHT
MAG3036-OA, MAG3036-WH, M2430-ACO, M1925-JVO
M2430-NHK, MS2431-GOK, MS2431-WHT, MS2431-SVL
MS2431-TRF, M2435-WHT, MD2532-CRM
Use and Care Guide
HARDWARE INCLUDED
AA - Hanging bracket
x 2
INSTALLING THE HANGING WIRE
NOTE: This step is optional, and the
hanging hardware is not included.
□ If you choose to use hanging wire (not included), a
steel wire with a minimum weight rating of 75 lbs. is
recommended. Attach it to brackets as shown below.
Please contact 1-888-774-8062 for further assistance.
Item#
1000 003 011, 1000 877 781
1000 611 953, 1000 958 598
1000 997 356, 1000 723 243
1000 877 418, 1000 720 982
1000 598 696, 1000 598 716
1000 013 634, 1000 019 054
1000 019 075, 1000 398 665
1000 398 646, 1000 398 655
1001 572 031, 1001 061 585
1001 319 442
Model#
Mirror
BB - Screw
x 4
HOMEDEPOT.COM/GLACIERBAY