Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
TOOLS REQUIRED
Claw hammer
Safety goggles
Measuring tape
Wall hardware
Installation
1
DETERMINING THE MOUNTING LOCATION
NOTE: Before installing, make sure all parts are present.
Compare parts with the Hardware Included list. If any part is
missing or damaged, do not attempt to install the product.
□ Determine the desired mounting location, and mark
the wall where the unit will be installed.
3
INSTALLING THE CABINET
□ For wall stud installation, insert #12 x 3 in. screws with washers into the stud locations (not included).
□ For drywall installation, drill holes at the appropriate locations and insert toggle bolts with washers
(not included).
□ For concrete wall installation, drill 1/4 in. holes at the appropriate locations and insert #12 wall
anchors, followed by #12 x 3 in. screws (not included).
Use and Care Guide
Bath Storage Cabinet
Phillips screwdriver
Level
HARDWARE INCLUDED
AA- Knob
Power drill
x 2
2
PREPARING THE CABINET
□ Drill 1/8 in. diameter holes through the back
panel of the cabinet on all four corners.
Item #1000 958 631
Item #1000 877 746
Item #1000 877 451
Item #1000 722 628
Item #1000 285 636
Item #1000 997 509
Item #1000 720 355
Item #1000 992 889
Item #1000 285 347
Item #1000 997 504
Item #1000 661 881
Model #TTART-CHT
Model #TTMEL-CHT
Model #TTC-ACO
Model #TTH-NHK
Model #TTH-OA
Model #TTH-WH
Model #TTC-CHR
Model #TTG-JVO
Model #TTDM-WH
Model #TTS-OA
Model #TTE-JVO
BB - Knob Screw
CC - Shelf Clip
x 2
DD - Shelf x 2
HOMEDEPOT.COM
Please contact 1-855-434-5224 for further assistance.
x 4
Publicidad
Manuales relacionados para Glacier bay TTART-CHT
Resumen de contenidos para Glacier bay TTART-CHT
- Página 1 Item #1000 285 636 Item #1000 997 509 Item #1000 720 355 Item #1000 992 889 Item #1000 285 347 Item #1000 997 504 Item #1000 661 881 Model #TTART-CHT Model #TTMEL-CHT Model #TTC-ACO Model #TTH-NHK Model #TTH-OA Model #TTH-WH Model #TTC-CHR...
- Página 2 Installation (continued) INSTALLING THE SHELF INSTALLING THE KNOBS □ Insert the shelf clips (CC) □ Attach the knobs (AA) to the into the holes on the cabinet with the knob inside of the cabinet. screws (BB). □ Rest the shelf (DD) on the shelf clips (CC).
- Página 3 1000 992 889 Núm. de artículo 1000 285 347 Núm. de artículo 1000 997 504 Núm. de artículo 1000 661 881 Núm. de artículo TTART-CHT Núm. de modelo TTMEL-CHT Núm. de modelo TTC-ACO Núm. de modelo TTH-NHK Núm. de modelo TTH-OA Núm.
- Página 4 Instalación (continuado) INSTALACIÓN DE LAS REPISAS INSTALACIÓN DE LA PERILLA □ Inserte los ganchos de □ Instale la perilla (AA) en el repisa (CC) proporcionados gabinete con el tornillo en los agujeros en el de perilla (BB) proporcionado. interior del gabinete. □...