Instruction Manual / International Warranty - Hindenberg Air Tracer 410-H Manual De Instrucciones / Garantía Internacional

Instruction Manual
INITIAL SETTING
When setting the watch for the first time, unscrew the crown by turning it counter-clockwise
and wind it at least 45 times.
WARNING: So as not to damage the mechanism, do not set the date/month etc. while
the hands are between 9am and 3pm (15:00) or between 9pm (21:00) and 3 am. Please
press the button on your watch slowly and carefully to avoid damaging the mecha-
nism. When the warranty of your watch expires, we recommend you to send it in for a
revision to ensure its longevity. A revision should optimally be conducted once a year
to counteract general wearout and to maintain the water-resistance of your watch.
SETTING THE DATE
Pull the crown carefully out to position 2 (two clicks) and set the hands outside the zone
mentioned before, e.g. at 6:00. Push the crown back to position 1 (one click position) and
turn it counterclockwise to the date required.
SETTING THE DAY OF THE WEEK AND THE DATE
Unscrew the crown of the pushers A and B by turning them counterclockwise. Press the ad-
justment pusher A until the right month is displayed. Press the adjustment pusher B until the
Air Tracer
required day is displayed. The date/month must be set manually at the end of the month.
Model-No.: 410-H
Automatic mouvement
SETTING THE TIME
Calibre H-16.410
Pull the crown carefully out to position 2. Turn the crown to set the hands on the time requi-
20 jewels
red. Then press the crown back in and bolt it by turning it clockwise.
5