Product Safety Information; Product Specifications - Ingersoll Rand W7002 Serie Especificaciones Del Producto

EN

Product Safety Information

Intended Use: These Cordless Impact Wrenches are designed to remove and install threaded fasteners.
● Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or
serious injury. Save all warnings and instructions for future reference.
● Responsibly recycle or dispose of Batteries. Do not puncture or burn batteries. Improper disposal may endanger the environment or cause personal injury.
● Only use Tools with appropriate voltage Ingersoll Rand batteries and Charger. Use of any other batteries may create a risk of fire, personal
injury or property damage.
For additional information, refer to Cordless Impact Wrench Safety Manual Form 04581146, Battery Charger Safety Information Manual
Form 10567832 and Battery Safety Information Manual Form 10567840.
Manuals can be downloaded from ingersollrandproducts.com.
IQ Power Control System
V
The intelligent control management system on this model can be adjusted with the power regulator. Select power mode by turning the dial at the
back of the tool and align the notch with the desired setting. Each mode provides intelligent power control in Forward and full power in Reverse.
Refer to illustration #1 on page 2.
Mode
Hand-tight
Wrench-tight
Half-power
Max-power
Impact wrenches are not torque wrenches. Connections requiring specific torque must be checked with a torque meter after fitting with an
impact wrench. Improperly torqued fasteners may loosen and cause injury.

Product Specifications

Voltage
Tool Model
V, DC
W7152 20
W7152P 20
W7252 20
Intelligent Power Control
Direction Mode
Forward
Reverse ALL
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
* K = Vibration measurement uncertainty
EN-1
Name
Torque-limiting, automatic shut-off
Torque-limiting, continuous run
Maximum torque, continuous run
Drive
Type
Square
Square (Pin Retainer)
Square (Extended, 2")
Tool Model - W7152, W7152P, W7252
Name
Hand-tight
Wrench-tight
Half-power
Max-power
Max-power
WARNING
Description
WARNING
\
Sound Level dB(A)
(EN60745)
Size †Pressure (L ) ‡Power (L
p
1/2" 95 106
1/2" 95 106
1/2" 95 106
No Load Speed Shut-off
600
1000
0-1450
0-1900
0-1900
Conforms to UL STD. 60745-1 & 60745-2-2.
Certified to CSA STD. C22.2 No. 60745-1 & 60745-2-2.
Battery Model - BL2010, BL2022
Impacts per Vibration (m/s
Minute (EN60745)
)
w
bpm Level
2450 17.0
2450 17.0
2450 17.2
Battery Model - BL2010, BL2022
Max Torque
ft-lb (Nm)
Refer to Figure A
Refer to Figure B
530 (720)
1000 (1360)
1000 (1360)
47621725001_ed4
)
2
*K
3.7
3.7
2.3
4004004