Bosch PFS 3000-2 Manual Original página 20

20 | English
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
Symbols
Symbols and their meanings
"Wood" application:
Spraying solvent-based and
The fine-spray system is
water-dilutable lacquers,
suitable for glazes and lac-
glazes, primers, clear lacquers
quers and for wall paints.
and oils
Choose the grey nozzle
cap (11) for the "wood" applic-
ation
Step 1:
Choose the correct nozzle
cap
Select setting 1, 2 or 3 on the
thumbwheel (4) for the "wood"
application
Step 2:
Setting the spray material
quantity
Set the "wood" application on
the sliding switch (25)
1 609 92A 685 | (09.09.2021)
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
The sticker regarding operation of the fine-spray system is located on the
base station. The correct interpretation of the symbols helps you operate the
fine-spray system quicker and more safely.
"Wall" application:
Spraying emulsion and latex
paints
Choose the white nozzle
cap (10) for the "wall" applica-
tion
Select setting 3, 4 or 5 on the
thumbwheel (4) for the "wall"
application
Set the "wall" application on
the sliding switch (25)
Detailed description
(see "Intended Use",
page 21)
(see "Changing the Nozzle Cap
(see figures B1–B2)",
page 22)
(see "Setting the spray mater-
ial quantity (see figure J)",
page 24)
(see "Setting the Air Flow
(see figure D)", page 24)
Bosch Power Tools