Preparing The Meter And Test Strip; Applying Blood Sample - i-SENS KetoSens BT Manual Del Usuario

Note
The skin depth to retrieve samples will vary for various people at
different sample sites. The lancing device's adjustable tip allows
the best depth of skin penetration for an adequate sample size.

Preparing the Meter and Test Strip

Step 7
Insert a test strip with the contact bars facing upwards into the
meter's test strip port. Gently insert the test strip until the meter
beeps. Do not force the test strip into the meter.
The symbol will appear on the screen.

Applying Blood Sample

Step 8
Obtain a blood sample using the lancing
device. Place the device against the pad
of the finger. Press the release button.
Remove the device from the finger. Wait
a few seconds for a blood drop to form.
A minimum volume of 0.5 microliter is
needed to fill the confirmation window
(actual size of 0.5 µL :
36 www.i-sens.com
).