Setting The Alarm Function; Setting The Time Alarms (Alarm 1-3) - i-SENS KetoSens BT Manual Del Usuario

Setting the Alarm Function

Three types of alarms can be set in the KetoSens BT meter.
The alarms ring for 15 seconds and can be silenced by pressing
any button or by inserting a test strip.
Setting the Time Alarms (alarm 1–3)
Step 1
Without inserting a test strip, press and hold the
◀ and S buttons simultaneously for 3 seconds
to enter the time alarm setting. 'alarm 1' will be
displayed while 'OFF' blinks on the screen.
Step 2
On pressing the ▶ button, 'alarm 1' is set and
'On' is displayed on the screen. Press the ▶
button again to cancel 'alarm 1'. 'OFF' will blink
on the screen.
Step 3
Press the ◀ button to adjust the time of alarm 1.
A number representing the time will blink on the
screen. Press the ▶ button to set the time.
44 www.i-sens.com