Description - Yamabiko MTA-TC Manual De Instrucciones

1. Drive shaft assembly - Contains a specially designed
liner and the flexible drive shaft.
2. Shield - Attached to deflect debris away from operator
and reduce accidental contact with tines.
3. Hub - Separately attached to axle ends by clevis pin
and spring pin. Tines bolt to hubs.
4. Tines - Identical on right and left side from operator's
position.

Description

5. Grease access bolt -Apply lithium grease with grease
gun to gear housing every 25 hours of use.
6. Gear housing - Houses gears and ball bearings for
driving tines.
7. Type and serial number
9
Description