Publicidad
Idiomas disponibles
Idiomas disponibles
English
SPECIFICATIONS : Before definitive fixing of call button and bell, check that it
correctly functions where you wish to install it.
A. Set up the 2 alkaline batteries 1,5 V – model " LR 06 AA" (not supplied)
in the bell :
1. Opening battery door.
2. Insert batteries into the battery compartment with correct polarity as indica-
ted.
B. Set up the 12 V battery – model A 23 (supplied) in the call button :
3. Open the call button with a flat screwdriver.
4. Insert the battery between the 2 clamps respecting polarity.
C. Check and try bell and button position before fixing ; push shortly the
call button to hear the bell.
Important: never hold the button and the bell in hand, nor fix it on a metallic
surface.
D. Definitive fixing of the bell:
Reminder: never put nor fix it on a metallic surface.
5. You can put the bell on a table or fix it on the wall with a screw.
E. Definitive fixing of the call button:
Reminder : never put nor fix it on a metallic surface.
6. Fix vertically with 2 screws (name plate directed necessarily downward).
7. Choose one of the 25 ring tones.
Take care of following instructions :
■ Never set it directly in front of sun.
■ Still use alkaline batteries for a better quality and longer life.
■ Never put new batteries with old ones.
■ Never use rechargeable batteries.
■ If you don't use for a long time, remove the batteries.
Publicidad
