troubleshooting
PROBLEM
There are food
particles remaining
on dishes.
(Not cleaning
properly.)
Leaves glasses with
a light fi lm.
Leaves a yellow
or brown fi lm on
the inside of the
dishwasher.
DW80H9950-00149A-03_EN_140811.indd Sec7:26
DW80H9950-00149A-03_EN_140811.indd Sec7:26
POSSIBLE CAUSE
The cycle selected was unsuitable. Select a cycle according to the number and
The water temperature is low.
Low water pressure.
The water is too hard.
Dishwasher detergent was not
used.
Detergent remains in the
dispenser.
There is no rinse aid.
A nozzle is clogged.
The dishes are improperly loaded.
Too many dishes have been
loaded.
The water supplied is soft and too
much detergent was used.
Aluminum dishes were included in
the wash load.
This is caused by coffee and tea
soils.
English - 26
SOLUTION
soil level of the dishes, as directed in this
manual.
Connect the water supply line to a hot
water supply. For best performance, the
temperature of the supplied water should
be 120 ˚F (49 ˚C).
The water pressure should be between
20 and 120 psi (140 ~ 830 kPa).
Use a commercial dishwasher cleaner.
Use high-quality, fresh detergent with rinse
aid.
Use automatic dishwasher detergent.
We recommend a powder or gel type
dishwasher detergent.
Make sure large items such as cookie
sheets, cutting boards, or contaners, etc.
are not blocking the detergent dispenser
and preventing it from opening properly.
Rearrange the dishes so they do not
interfere with detergent dispenser
operation.
Check the dispenser and add rinse aid.
Use liquid type rinse aid.
Clean the nozzle. See pages 22 and 23.
Rearrange the dishes so they do not
interfere with nozzle rotation and detergent
dispenser operation.
Load only an appropriate number of dishes.
Load your dishes as recommended.
(See page 16.)
Underload the dishwasher and use a rinse
aid to minimize this.
Remove the marks on the dishes using a
low sensitivity cleaner.
Remove the soils using a spot cleaner.
2014-08-11
2014-08-11
6:25:47
6:25:47