2
FIT AND SECURE
2.7
2.8
2.9
FAJT001 / FAJT002_REV_A00
4
9
10
6
Secure the rear Inner Bracket (Item 6) using
a M8 x 100 Hex Bolt, M8 SS Spring Washer
and M8 x 19 x 2SS Flat Washer. (Items 15, 16
& 17) As shown.
Do this on both sides of the vehicle.
13mm
Secure the front Inner Bracket (Item 6) using
a M8 x 100 Hex Bolt, M8 SS Spring Washer
and M8 x 19 x 2SS Flat Washer. (Items 15, 16
& 17) As shown.
Do this on both sides of the vehicle.
13mm
Insert the Aluminum Spacers (Item 10)
into the Foam gaskets (Item 9). Remove the
paper backing from the Foam gaskets to
expose the adhesive.
Insert the Washer/Spacer combination,
adhesive side down, into the 22mm holes so
that the Spacer comes to rest on the Inner
Brackets.
Firmly press the Foam gaskets all the way
around, adhering it to the roof.
© 2020 FRONT RUNNER VEHICLE OUTFITTERS