Briggs & Stratton WP15-225 Manual Del Operario página 11

Stopping the Water Pump
1. Move engine speed lever to "Slow" (
(Figure 10).
2. Push on/off switch to "Off" position (Figure 10).
CAUTION
Backfire, fire or engine damage could occur.
• DO NOT stop engine by moving choke lever to "Choke"
position.
3. Turn white fuel valve to "Off" position (Figure 9).
Drain and Flush Water Pump
1. Disconnect and drain suction and discharge hoses.
2. Remove drain plug at bottom of pump (Figure 12).
Figure 12 — Remove Drain Plug
OPERATION
3. Remove plug from top of pump and flush internal
components of pump with clean water (Figure 13).
) position
Figure 13 — Remove Plug from Top of Pump and Flush
4. Replace both plugs and twist.
11