Chauvet DJ GEYSER P6 Guía De Referencia Rápida página 8

Geyser P6 QRG
Control Panel
Description
Menu Options
Main Level
Addr
CH-1–CH-4
Ht
DMX Linking
Starting
Address
Wireless
Remote
Control
Button Function
<MENU> Exits from the current menu or function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases the
<DOWN>
numeric value when in a function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Programming Levels
d- -1– d503
P1-1–P1-32
T _ _ _
The Geyser P6 can work with a DMX controller when linked by DMX serial
connections. Instructions for connecting and configuring this product for
DMX operation are in the User Manual. If you are not familiar with DMX,
download the DMX Primer from www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 503.
To trigger fog output and activate the color program using the wireless
remote control, do the following:
1. Plug the wireless receiver into the Remote Control Receiver port on the
side of the Geyser P6
2. Program the color choice for each button on the remote (1–4), using the
CH-1–CH-4 menu options on the Geyser P6.
3. On the wireless transmitter, press the button assigned to the color program
(1–4). The Geyser P6 emits fog and activates the color program for as
long as you hold down the button.
Description
Selects DMX starting address
Selects preset colors for wireless remote
operation
Shows current temperature of product
EN