Targa TAG-1900 Manual De Instrucciones página 7

(B) CD PLAYER MODE
When pressed short, they are operated as TRACK UP or TRACK DOWN mode.
When pressed longer than 1 sec., they are operated as CUE or REVIEW mode.
12. AUTO SEEK SEARCH TUNING (AS/PS)
By pressing shortly, the radio searches for each preset station.
When field strength level is bigger than the threshold level of stop level, the radio is holding at
that preset number for 5 sec. with releasing mute, and than searches again.
By pressing longer than 1 sec, and then 6 strongest stations are preset to the corresponding
preset number. When AS operation is finished, the radio executes the preset scan.
13. 'SCAN' AUTOMATIC TUNING CONTROL (SCN)
This key is operated as RADIO SCAN
The operation is similar as normal search but different thing is holding 5 seconds on every
station detected in RADIO SCAN mode.
14. LCD DISPLAY
The Liquid Crystal Display will display the current state of the unit.
CD CONTROL LOCATION OF PARTS
11. TRACK/SEARCH BUTTON
FORWARD AND REVERSE TRACK SEARCH (or changing songs)
Press the SKIP button (
....REVERSE
Press and hold the SKIP button (
the desired music section of the disc is found, release the button. Normal play will resume.
16. CD SLOT
17. CD EJECT BUTTON
Press the EJECT button to remove the CD.
18. PAUSE BUTTON
During "PLAY", press (18) 'PAU' button to "PAUSE". Press it again to resume play.
19. INTRO BUTTON (Preview all Tracks)
When this button is pressed, 'INT ON' indication is displayed and the first several seconds of
each track of the disc are played. Press again to stop intro and listen to track.
20. REPEAT BUTTON 'RPT'
When this button is pressed, 'RPT' indication is displayed and play of the selected track will be
continually repeated until the Track repeat mode is cancelled by pressing 'RPT' button again.
21. RANDOM BUTTON 'RDM'
When this button is pressed, 'RDM' indication is displayed and each track of the disc are
played in random instead of normal progression. To cancel RANDOM mode, press 'RDM'
button (21) again.
• RESET
Reset button (22) is placed on the housing.
The reset button is to be activated for the following reason:
• Initial installation of the unit when all wiring is completed.
• All the function button do not operate.
• Error symbol on the display.
or ) during play to go to the desired track(song).
....FORWARD
or ) during play to scan the disc at high speed. When
E-6