ASROCK 4Core1600P35-WiFi+ Guía Rápida De Instalación página 30

ATX Power Connector
(24-pin ATXPWR1)
(see p.2, No. 38 or p.3, No. 37)
Though this motherboard provides 24-pin ATX power connector,
it can still work if you adopt a traditional 20-pin ATX power supply.
To use the 20-pin ATX power supply, please plug your
power supply along with Pin 1 and Pin 13.
ATX 12V Power Connector
(8-pin ATX12V1)
(see p.2/3 No. 2)
Though this motherboard provides 8-pin ATX 12V power
connector, it can still work if you adopt a traditional 4-pin ATX
12V power supply. To use the 4-pin ATX power supply, please
plug your power supply along with Pin 1 and Pin 5.
SLI/XFIRE Power Connector
(4-pin SLI/XFIRE_POWER1)
(see p.2 No. 37 or p.3 No. 36)
IEEE 1394 Header
(9-pin FRONT_1394)
(see p.2 No. 25)
3 0 3 0
3 0 3 0 3 0
ASRock 4Core1600P35-WiFi+ / 4Core1600P35-WiFi Motherboard
12 24 Please connect an ATX power
supply to this connector.
1 13
20-Pin ATX Power Supply Installation
Please connect an ATX 12V
4 8
power supply to this connector.
5
1
4-Pin ATX 12V Power Supply Installation
It is not necessary to use this
connector, but please connect it
with a hard disk power connecor
when two graphics cards are
SLI/XFIRE_POWER1
plugged to this motherboard at
the same time.
Besides one default IEEE 1394
port on the I/O panel, there is one
IEEE 1394 header
(FRONT_1394) on this
motherboard. This IEEE 1394
header can support one IEEE
1394 port.
12 24
1 13
4 8
1 5