Phantom PHOTOBIO TX Manual Del Usuario página 9

Step 4. Power connection
Connect the power cable harness with the driver AC connector, as shown in Fig. 7.
Step 5. Dimming connection (Optional)
The product is equipped with dimming connection supporting 0-10V dimming signal. Use the
provided PHOTO LOC 0-10V Control Cable (Part C) to interface with Autopilot PX2 advanced
digital & analog lighting controller (APDPX2) to centralize control of up to 80 PHOTOBIO fixtures.
For connections between aisle to aisle, please use PHOTOBIO LOC 0-10V Control Cable 16'
Jumper (PTBCCJ16W).
USER MANUAL
AC input power connector
Fig. 7
Dimming connection
Power cable harness
9
TM