Tidying Cables - LG 32LN520B Manual Del Propietário

16
ASSEMBLING AND PREPARING
Securing the TV to a wall (optional)
(Depending on model)
1
Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2
Mount the wall brackets with the bolts to
the wall.
Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets
tightly with a sturdy rope or cable.
Make sure to keep the rope parallel to the
flat surface.
CAUTION
Make sure that children do not climb on or
y y
hang on the TV.
NOTE
Use a platform or cabinet that is strong and
y y
large enough to support the TV securely.
Brackets, bolts and ropes, are optional. You
y y
can obtain additional accessories from your
local dealer.

Tidying cables

1
Install the cable holder as shown.
2
Gather and bind the cables with the cable
holder.
CAUTION
Do not move the TV by holding the cable
y y
holder, as the cable holders may break, and
injuries and damage to the TV may occur.
When attaching a wall mount bracket to the
y y
TV, the Cable holder hole is located on the
TV back cover.
Cable Holder Hole
Cable Holder
Cable Holder
or