Call Transfer; Call Forward; Speed Dial - Yealink SIP-T42G Guia De Inicio Rapido

If there is more than one call on hold, press
the Resume soft key.

Call Transfer

You can transfer a call in the following ways:
Blind Transfer
1. Press the Tran soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to.
3. Press the Tran soft key.
Semi-Attended Transfer
1. Press the Tran soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press
3. Press the Tran soft key when you hear the ring-back tone.
Attended Transfer
1. Press the Tran soft key during an active call. The call is placed on hold.
2. Enter the number you want to transfer to, and then press
3. Press the Tran soft key when the second party answers.

Call Forward

To enable call forward:
1. Press the Menu soft key when the phone is idle, and then select Features->Call Forward.
2. Select the desired forward type:
Incoming calls are forwarded unconditionally.
Incoming calls are forwarded when the phone is busy.
No Answer Forward----Incoming calls are forwarded if not answered after a period of time.
3. Enter the number you want to forward to. For No Answer Forward, press
the desired ring time to wait before forwarding.
4. Press the soft key to accept the change.
Call Conference
1. Press the Conf soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press the Send soft key.
3. Press the Conf soft key again when the second party answers. All parties are now joined in the
conference.
4. Press the Cancel soft key to disconnect all parties.
Note: You can split the conference call into two individual calls by pressing the Split soft key.

Speed Dial

1. Press the Menu soft key when the phone is idle, and then select
2. Select the desired DSS key, and then press the Enter soft key.
3. Select Speed Dial from the
a label in the Label field and enter the number in the Value field.
4. Press the soft key to accept the change.
Press the speed dial key to dial out the preset number.
or to select the desired call, and then press
field, select the desired line from the Account ID field, enter
.
.
or to select
.
E
N
G
L
I
S
H
5