Hayward AquaRite + Manual Del Usuario página 34

Characteristics
Power supply
Current consumption
Power consumption
Safety rating
Characteristics of pH and AUX1 relays
Dimensions
Connecting the ORP option (Optional)
Insert the ORP probe into the measuring chamber.
Connect the BNC connector on the ORP probe to the redox BNC input on the AquaRite +.
Remove the two screws from the bottom of the box and unclip the top of the cover to remove it.
Fit the electronic card into the AquaRite + box.
Page 10 of 23
230 V
0.9 A
200 W
IPX4
Imax (pH+Aux1+Aux2) = 3,15A , Pmax (PH+Aux1+Aux2) = 725 W
270 x 220 x 150
Screw
Vis
USE ONLY GENUINE REPLACEMENT PARTS
AquaRite +
50 Hz

Screw
Vis
Rev. E