•
Default the recording icon (
•
In case the motion or alarm detection is activated and a motion or alarm is detected, the motion (
alarm (
) icon is shown.
•
When timed recording is enabled, the timed recording icon (
•
Default, the device is in HDD overwrite mode and the icon (
Play-back
•
Make sure the control panel is not locked and press the PLAY button on the control panel or use the quick
menu bar to open the playback control panel.
Note: play-back needs at least 8192 recorded images to work properly (e.g. with IPS=30, the recording must
be at least 273 seconds long).
•
The fast forward (
Repeatedly pressing the button will increase/decrease speed to 4x, 8x 16x or 32x (max.).
•
Press the pause button (
•
Press the stop button (
•
Press the SLOW button once to set play-back speed to 1/4
Search
•
There are four ways to search recorded files: by record list, motion list, alarm list or by timer list.
•
To search an event, press the LIST button on the front panel (make sure the control panel is not locked). An
overview of the recorded file types (ALARM, MANUAL, MOTION, SYSTEM and FULL LIST) is shown.
•
Select the desired list and recording from the list.
•
Press ENTER to start play-back.
Note: the recorded files can also be searched via the included Video Viewer software.
9. Technical specifications
DVR4L5
video system
video compression
video input
video output
maximum recording
rate (PAL)
image quality setting
hard disk storage
recording mode
refresh rate
audio I/O
motion detection area
motion detection sensitivity
pre-alarm recording
backup device
web transmitting / compression format H.264
Ethernet
web interface
network connection
digital zoom
key lock
video loss detection
camera title
video adjustments
date display format
power source
power consumption
operating temperature
system recovery
dimensions
07/07/2010
) is shown.
) and fast rewind (
) buttons will increase resp. decrease the play-back speed.
) to temporary suspend video play-back.
) to return to live monitoring.
PAL
H.264 (CIF)
4 channels, composite video signal 1Vpp / 75 ohms BNC
composite video signal 1Vpp / 75 ohms BNC
VGA – max. 1600 x 1200 pixels
frame
704 x 576 pixels with 25 IPS (PAL)
CIF
352 x 288 pixels with 100 IPS (PAL)
best - high - normal - basic
built-in SATA type, support 1x HDD, support HDD capacity over 1TB (HDD
not incl)
manual / timer / motion / network / alarm controlled
100 IPS for PAL
4x audio in, 1x audio out (mono)
16 x 12 grids per channel
4 adjustable parameters for accurate detection
8MB
USB 2.0 flash drive (for backup and firmware updates)
10/100 Base-T, supports network control and LiveView via Ethernet
supports licensed "video viewer" software / Internet Explorer or Mozilla Firefox
web browser / Quick Time player
supports TCP/IP, PPPoE, DHCP and DDNS function
2x (live & playback)
yes
yes
up to 6 characters
hue / colour / contrast / brightness
YY/MM/DD, DD/MM/YY, MM/DD/YY, and off
19VDC
< 42W
10°C ~ 40°C (50°F ~ 104°F)
system auto recovery after power reconnected
343 x 223 x 59mm
CCTVPROM8
) is showed and the timed recording LED is on.
) is shown.
th
and twice for 1/8
8
th
.
©Velleman nv
) resp.