Glacier bay F1AA0006BNV Guía De Instalación Y Cuidado página 8

Installation (continued)
Turn on the water supply, and then turn on the valve
to check all connections for leaks.
Remove the red stop (a) and replace it against the
stationary stop (c) to prevent the valve stem from
turning further.
Turn the lever to the off position once the temperature
is set.
NOTE: Seasonal maintenance of the maximum outlet
temperature may be required due to changes in
groundwater temperature.
Turn the valve counterclockwise to the full position.
After several minutes, check the temperature using
the thermometer.
Slowly turn the valve clockwise to adjust the maximum
water temperature to the desired temperature.
CAUTION: The maximum water temperature should
never be set above 120°F (49°C).
c
a
b
a
b
a
c
b
8
a
c
b
120°F
(49°C)
a
b
a
c
b