Descargar Imprimir esta página

Troubleshooting - TRENDnet TE100-P1U Guía De Instalación Rápida

Ocultar thumbs Ver también para TE100-P1U:

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting

Q1.
I correctly typed in the print server name and printer name, but I still cannot add a
network printer. What should I do?
A1.
Double check your hardware connections; make sure that the print server and printer
are powered ON and are properly connected. Also verify that the spelling of the server name
and printer name are correct.
Q2.
I verified that the hardware installation is correct and that the print server name and
printer name are correct, but I still cannot find the network printer. What should I do?
A2.
Make sure that the print server name and printer name are entered correctly. There
should be no spaces, and the back slashes that separate the print server name and printer
name should be this, \\, instead of this, //. Note that the Port Name is the same name used to
identify the Printer Name.
Q3.
I successfully added a network printer to my computer and I can print a test page, but I
cannot print anything from Microsoft Word or other applications.
A3.
Make sure to set the newly installed network printer as your default printer. Click Start
and then click Printers & Faxes, verify that your printer icon has a check on it.
Q4.
I configured my print server to automatically receive an IP Address from a DHCP server,
and now I cannot go into the print server's web utility.
A4.
Open PS-Utility v3.00 (See 3. Configure the Print Server) to locate your print server's IP
Address. For Mac users, press the Reset button at the back of the TE100-P1U, hold the
button for 15 seconds, release the button, and enter
access the web features.
Certifications
This equipment has been tested and found to comply with FCC and CE Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received.
Including interference that may cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO
OPERATE THE EQUIPMENT.
http://192.168.0.1
Waste electrical and electronic products
must not be disposed of with household
waste. Please recycle where facilities
exist. Check with you Local Authority or
Retailer for recycling advice.
7
in a web browser to

Publicidad

loading