assemble back original position.
Caution: operate carefully because of the hot nozzle after foaming and
advise you should operate it after being cooled down.
Note: to prepare more than one cappuccino, first make all the coffees
then at the end prepare Foam milk for all the cappuccinos.
CARE AND CLEANNING
1. Always unplug from appliance before cleaning.
2. Clean appliance with soft cloth ,never use abrasion cleaner.
3. Rinse detachable components such as steel mesh ,metal funnel,
carafe ,measuring spoon in warm water ,and reassemble them in place after
cleaning.
4. Under normal condition appliance shall be descaled at intervals of 2-3
months . the details refer to the "CLEANING MINERAL DEPOSITS".
Note: when boiling water, please keep away from appliance to prevent
spilled water injury to person.
5. Before appliance will be stored for long time, always clean and dry coffee
maker completely. When it will be reused, clean it first.
CLEANING MINERAL DEPOSITS
1. To make sure your coffee maker operating efficiently, internal piping is
cleanly and the peak flavor of coffee, you should clean away the mineral
deposits left every 2-3 months.
2. Fill the tank with water and descaler to the MAX level (the scale of water and
descaler is 4:1, the detail refers to the instruction of descaler. Please use
"household descaler", you can use the citric acid (obtainable from chemist's
or drug stores) instead of the descaler (the one hundred parts of water and
three parts of citric acid).
3. According to the program of making coffee, put the metal funnel (no coffee
powder in it) and carafe in place. Brewing water per " How to make espresso
coffee".
4. Then turn switch on and indicating light will be illuminated, brewed coffee
will begin flowing into carafe after aprox.3 minutes, and make two cups
GB - 14