Maintenance Information; Extension Cords - Dremel MM40 Instrucciones De Funcionamiento Y Seguridad

DM 2610016364 02-12_DM 2610016364 02-12.qxp 2/27/12 7:35 AM Page 17
Service
NO USER SERVICEABLE
! WARNING
PARTS INSIDE. Preventive
maintenance performed by un au thorized
personnel may result in misplacing of
internal wires and components which
could cause serious
recommend that all tool service be performed
by a Dremel Service Facility.
CARBON BRUSHES
The brushes and commutator in your tool have
been engineered for many hours of
dependable service.To maintain peak
efficiency of the motor, we recommend every
50 - 60 hours the brush es be serviced by a
Dremel Service Facility.

Extension Cords

If an extension cord is
WARNING
!
necessary, a cord with
adequate size conductors that is capable
of carrying the current necessary for your
tool must be used. This will prevent
excessive voltage drop, loss of power or
overheating. Grounded tools must use 3-wire
extension cords that have 3-prong plugs and
receptacles.
NOTE: The smaller the gauge number, the
heav i er the cord.

Maintenance Information

WARNING
!
the power supply before cleaning or
performing any main tenance. The tool may
be cleaned most effectively with compressed
hazard. We dry air. Always wear safety gog gles when
cleaning tools with compressed air.
Ventilation openings and switch levers must
be kept clean and free of foreign matter. Do
not at tempt to clean by inserting pointed
objects through openings.
CAUTION
!
plastic parts. Some of these are: gasoline,
carbon tetrachlo ride, chlo rinated cleaning
solvents,
detergents that contain ammonia.
Extension Cords
RECOMMENDED SIZES OF EXTENSION CORDS
120 VOLT ALTERNATING CURRENT TOOLS
Toolʼs
Ampere
Rating
3-6
6-8
8-10
10-12
12-16
-17-
BDL-2610016364, Page: MUL (VAA), downloaded at: 2017.03.17_15:51:06, by PT-RT/MKB2_Nicole.Hayden
Cleaning
To avoid accidents always
dis connect the tool from
Certain cleaning agents
and sol vents damage
ammonia and house hold
Wire Sizes in mm
Cord Size in A.W.G.
Cord Length in Feet Cord Length in Meters
25 50 100 150 15 30 60
18 16 16 14 0.75 0.75 1.5
18 16 14 12 0.75 1.0 2.5
18 16 14 12 0.75 1.0 2.5
16 16 14 12 1.0 2.5 4.0
14 12 — — — — —
2
120
2.5
4.0
4.0
—
—