Care, Maintenance & Cleaning - HoMedics BPA-110 Manual Del Usaurio

CARE, MAINTENANCE & CLEANING
• Clean the blood pressure monitor body and cuff carefully
with a slightly damp, soft cloth. Do not press. Do not
wash cuff or use chemical cleaner on it. Never use
thinner, alcohol or petrol (gasoline) as cleaner.
• Leaky batteries can damage the unit. Remove the
batteries when the unit will not be used for a long time.
• Follow local ordinances and recycling instructions
regarding disposal or recycling of the device and
device components, including batteries.
• If the unit is stored near freezing, allow it to acclimate to
room temperature before use.
• This blood pressure monitor is not field serviceable. You
should not use any tool to open the device nor should
you attempt to adjust anything inside the device. If you
have any problems with this device, please contact
HoMedics ® Consumer Relations (contact information can
be found on the warranty page).
• Do not immerse the unit in water as this will result in
damage to the unit.
• Do not subject the monitor or cuff to extreme
temperatures, humidity, moisture, or direct sunlight.
Protect from dust.
• Do not fold the cuff and tubing tightly.
• Do not disassemble the monitor or cuff. If in need of
repair, refer to the warranty section of this manual.
25
• Do not subject the monitor to extreme shocks (do not
drop on floor).
• Do not inflate the cuff unless wrapped around arm.
• Do not wrap the cuff around body parts other than your
arm.
• Do not drop or insert any object into any opening or
hose.
• To avoid accidental strangulation keep this product away
from children. Do not drape tube around neck.
• This monitor may not meet its performance specifications
if stored or used outside of these temperature and
humidity ranges:
• Storage/Transportation
Environment
Temperature:
- 13°F~158°F (-25°C~70°C)
Humidity:
less than 93% RH
• Operating
Environment
Temperature:
41°F~104°F (5°C ~40°C)
Humidity:
15% ~ 93% RH
26