Quick Start; Unit Diagram - Urrea UD20 Manual De Usuario

E N G L I S H
Automaticaly after 6 seconds
Emissivity 0.95
°C / °F Switchble Yes
Backlight Yes
Laser sight switchable No
Max/Min/Avg./∆T No
Auto-measuring No
10 point memory No
Audio alarm No
Battery type 9V, IEC6F22, NEDA 1604
Dimensions 6.69" x 5.23" x 1.71" (170 x 133 x 45 mm)
Weight 187g approx
Accessories 9V battery, instruction manual, carrying
4. OPERATION OF INSTRUMENT

4.1 Quick start

To measure a temperature, point the unit at the target you want
to measure, pull the trigger and hold on till the end of shot. In
SCAN mode, the LCD displays either the current temperature in
celsius or fahrenheit. The unit will HOLD the last reading for
about 6 seconds after the trigger is released, the word HOLD
appears. Be sure to consider the target area inside the angle
of vision of this instrument. The single spot of laser is used for
aiming only.

4.2 Unit diagram

1. Display screen.
2. Laser sighting.
3. Measuring window.
4. Measuring trigger.
5. Battery and cover.
6. Scan/Hold/Auto mode indication.
7. Laser ON/OFF indication.
8. Data memory indication.
9. °C / °F unit indication.
10. Temperature indication.
11. Low battery.
9