Symbols; Safety Warnings; Intended Use; Technical Data - Festool STM 1800 Manual De Instrucciones Original

English
Contents
1 Symbols..................................................... 10
2 Safety warnings.........................................10
3 Intended use..............................................10
4 Technical data........................................... 10
5 Items included...........................................11
6 Assembly................................................... 11
7 Settings......................................................11
8 Transportation...........................................12
9 Working with the mobile saw table and
work bench................................................ 12
10 Service and maintenance..........................13
11 Environment.............................................. 13
1

Symbols

Warning of general danger
Read the operating instructions and
safety instructions.
Do not climb on the unit
Max. load
Cutting depth max. 10 mm deeper than
the thickness of the workpiece
Do not dispose of it with domestic
waste.
Handling instruction
Tip or advice
2

Safety warnings

Warning! Read and observe all instruc­
tions and safety warnings. Failure to adhere to
the warnings and instructions may cause
serious injuries.
Keep all safety warnings and instructions in a
safe place for future reference.
- Set the mobile saw table and work bench
up correctly before carrying out any work.
Proper assembly is important in order to
avoid the risk of the mobile saw table and
work bench collapsing.
- Place the mobile saw table and work
bench on a solid, even and horizontal
surface. If the mobile saw table and work
bench slides or wobbles, it may not be
possible to control the power tool safely
and reliably.
10
Do not overload the mobile saw table and
-
work bench and never use it as a ladder or
trestle. Overloading or standing on the
mobile saw table and work bench may shift
the centre of gravity of the mobile saw table
and work bench upwards and cause it to tip
over.
Pay attention to the maximum weight of
-
the workpiece.
- Pay attention to the maximum workpiece
dimensions.
Replace damaged wooden supports if
-
these can no longer guarantee secure
support for the workpiece.
Pay attention to the cutting depth when
-
sawing. Select a cutting depth that is a
maximum of 10 mm deeper than the thick­
ness of the workpiece.
-
Wear suitable personal protective equip­
ment: Protective gloves and safety shoes.
- Ensure that persons standing near the
mobile saw table and work bench are at a
safe distance from the work area.
3

Intended use

The mobile saw table and work bench is
designed for safe, accurate sawing and routing
in combination with Festool power tools.
Smaller workpieces can also be securely
clamped to the mobile saw table and work
bench by means of screw clamps
saw table and work bench is consequently
designed for many other tasks such as planing,
grinding, milling, etc.
The tilting function facilitates the cutting and
handling of large sheets.
* Not included in the scope of delivery.
The user is liable for improper or non-
intended use.
4

Technical data

Mobile saw table and
work bench
Table dimensions
(width x length x
height) when folded
Min. contact surface
Max. contact surface
. The mobile
*
STM 1800
1150 x 250 x 700 mm
1100 x 1050 mm
1800 x 2100 mm