Rear View Camera; Rear View Camera Settings - Sony XAV-601BT Manual De Instrucciones

Ocultar thumbs Ver también para XAV-601BT:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Rear view camera

By connecting the optional rear view camera to
the CAMERA terminal, you can display the
picture from the rear view camera.
The picture from the rear view camera appears
when:
– the back lamp lights up (or the shift lever is set
to the R (reverse) position).
– you press (HOME) then touch "Rear
Camera."*
– you press (DSPL) repeatedly.*
* The marker lines you edit in Rear view camera
settings do not appear.
Note
When backing up your car, watch the surroundings
carefully for safety. Do not depend on the rear view
camera exclusively.
Tip
Even if a rear view camera is connected, you can set
the unit to not display the picture from a rear view
camera by deactivating the camera input (page 51).

Rear view camera settings

You can display setting items on the picture from
the rear view camera to assist operation.
This setting is available only when:
– "Camera Input" is set to "Normal" or
"Reverse" (page 51).
– the parking brake is applied.
1
Press (HOME), then touch "Settings."
2
Touch
.
3
Move the scrollbar up and down, then
touch "Rear View Camera Setting."
The setting items appear.
Displaying marker lines
Touch
.
Touch
again to hide the marker lines.
58
Editing lines
1 Touch
.
2 Select the line to edit.
Touch
,
corresponding to the line to edit.
3 Edit the line.
To increase the length, touch B b.
To reduce the length, touch bB.
To adjust the position, touch V or v.
To restore the default setting, touch "Reset."
To return to the previous display, touch
or
.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido