Leister SILENCE Instrucciones De Funcionamiento página 13

Installation declaration
(in terms of the EC machinery directive 2006/42; Appendix II B)
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland hereby declares the partly
completed machinery
Designation:
Type:
– as far as it is possible from the scope of supply – fulfills the applicable essential requirements of the EC machinery
directive (2006/42/EC).
The partly completed machinery furthermore complies with the provisions of the following EC directive(s):
EC directive(s):
Harmonised standards:
In addition, we declare the relevant technical documentation for this partly completed machinery is compiled
in accordance with Annex VII (part B) and will be electronically transmitted to national authorities in response
to a reasoned request. Authorised documentation representative: Volker Pohl, Manager Product Conformity
The partly completed machine must not be put into service until the final machinery into which it is to be
incorporated has been declared in conformity with the provisions of the EC machinery directive (2006/42/
EC), where appropriate.
Kaegiswil, 09.02.2016
Disposal
Electrical equipment, accessories and packaging should be recycled in an environmentally friendly way.
For EU countries only: Do not dispose of electrical equipment with household refuse!
Blower
SILENCE; ASO
Electromagnetic Compatibility
2004/108 (until 19.04.2016), 2014/30 (starting 20.04.2016)
Low Voltage Directive
2006/95 (until 19.04.2016), 2014/35 (starting 20.04.2016)
RoHS Directive 2011/65
EN 12100, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3,
EN 62233, EN 60335-2-80, EN 50581
Bruno von Wyl, CTO Andreas Kathriner, GM
13