Leister SILENCE Instrucciones De Funcionamiento página 17

Operation
• The SILENCE and ASO Blower is designed for air inlet temperatures up to 200 °C. The RBR blower is designed
for air intake temperatures of up to 350 °C
• The blower must be connected by an electric engineer.
Pay attention to the direction of rotation!
• A suitable device for complete disconnection from the mains must be provided in the mains connection!
• The appropriate connections should be made in the connection box (4) depending on the voltage.
• For use in a dusty environment, a Leister stainless steel filter should be fitted onto the blower air intake (2).
Circuit diagram
in connection box lid (5)
220 – 254 V 380 – 440 V 220 – 254 V
W2 U2 V2 W2 U2
U1 V1 W1 U1 V1
L1 L2 L3 L1 L2
Training
Leister Technologies AG and its authorised service points provide free courses in the area of applications.
Information at www.leister.com.
3D drawings
3D drawings are available from your Service Centres or at www.leister.com.
Accessories
Only Leister accessories may be used.
Service and Repairs
Repairs should only be carried out by authorised Leister Service Centres. They guarantee a correct and
reliable repair service within reasonable period, using original spare parts in accordance with the circuit
diagrams and spare parts lists.
Warranty
• For this tool, the guarantee or warranty rights granted by the relevant distributor/seller shall apply. In case of
guarantee or warranty claims any manufacturing or workmanship defects will either be repaired or replaced
by the distributor at its discretion. Warranty or guarantee rights have to be verified by an invoice or a delivery
document.
• Additional guarantee or warranty claims shall be excluded, subject to mandatory provisions of law.
• Warranty or guarantee shall not apply to defects caused by normal wear and tear, overload or improper handling.
• Warranty or guarantee claims will be rejected for tools that have been altered or changed by the purchaser
W2 U2 V2
V2
U1 V1 W1
W1
L3 L1 N
17