TFA ScanTemp 410 Instrucciones De Uso página 8

Ocultar thumbs Ver también para ScanTemp 410:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
TFA Anl. No. 31.1115_04_20
ScanTemp 410 – Infrared Thermometer
full
• Change the batteries when the battery symbol
appears on the display.
• Confirm the unit is powered off before changing battery.
• The battery compartment is in the handle. Slide down the
battery compartment lid. Insert two new batteries 1,5 V
AAA. Ensure that the battery polarity is correct.
• Close the battery compartment again. The cover is properly
inserted in the housing, as soon as a click is heard.
8. Error messages
Temperature taken is not within the
measuring range:
°C
"Hi" = Temperature is higher than
500°C (932°F)
"Lo" = Temperature is lower than
°C
-60°C (-76°F)
"Er2"= Rapid ambient temperature change
"Er3"= Ambient temperature not within the
operating range. Please pay attention
to the operation temperature of
about 0°C to 50°C. Wait at least
30 minutes to adapt the thermometer
to working temperature.
14
09.04.2020
9:38 Uhr
half-full
empty
Seite 8
ScanTemp 410 – Infrared Thermometer
"Er" = All other error messages:
Switch of the instrument, remove the
battery for 1 minute, then repower
it. If the error message does not dis-
appear, contact the retailer for
further service.
9. Waste disposal
This product has been manufactured using high-grade materi-
als and components which can be recycled and reused.
Never dispose of empty batteries and recharge-
able batteries with ordinary household waste.
As a consumer, you are required by law to take
them to your retail store or to an appropriate col-
lection site depending on national or local regu-
lations in order to protect the environment.
The symbols for the contained heavy metals are:
Cd = cadmium, Hg = mercury, Pb = lead
This product is labelled in accordance with the
EU Waste Electrical and Electronic Equipment
Directive (WEEE).
Please do not dispose of this product in ordinary
household waste. As a consumer, you are
required to take end-of-life devices to a designat-
ed collection point for the disposal of electrical
and electronic equipment, in order to ensure
environmentally-compatible disposal.
10. Specifications
Temperature range:
-60 .. +500 °C
(-76 .. +932 °F)
15

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

31.1115

Tabla de contenido