Disposal Of The Old Device; Guarantee - Caso FastVac 1000 Manual Del Usuario

The bag does not hold
the vacuum after it has
been sealed
PLEASE NOTE
► In the event of technical troubles, faulty devices or missing parts, please contact
Customer Service.

20 Disposal of the Old Device

To protect the environment, it's important to dispose of old electronic devices
properly. Do not place your old unit in the non-recyclable waste under any
circumstances.
PLEASE NOTE
Please take your old unit to the nearest recycling center for safe disposal.
►
Until it can be disposed of properly, store your old unit away from children.
►

21 Guarantee

We provide a 12 month guarantee for this product, commencing from the date of sale, for
faults which are attributable to production or material faults.
Your legal guarantee entitlements in accordance with § 439 ff. BGB-E remain unaffected
by this.
The guarantee does not include damages, which were incurred as a result of improper
handling or use, as well as malfunctions which only have a minor effect on the function or
the value of the device. Consumables, transit damages, inasmuch as we are not
responsible for these, as well as damages, which were incurred as a result of any repairs
that were not performed by us, are also excluded from the guarantee entitlements.
This device is designed for use in commercial situations and has the appropriate
performance levels.
In the event of justified complaints, we will repair the faulty device at our discretion or
replace it with a trouble-free device.
Any pending faults must be reported within 14 days of delivery.
All further claims are excluded.
To enforce a guarantee claim, please contact us prior to returning the device (always
provide us with proof of purchase).
caso FastVac 1000
The bag is defective
There are leaks along the
welding seam as a result of
creases, crumbs, grease or
liquids.
Select another bag; wrap paper
around any sharp edges within
the bag.
Open the bag again and clean
the upper internal part of the bag.
Remove any foreign matter that
might be on the welding bar
before sealing.
44