Sony XR-C450W Manual De Instrucciones página 9

3
Enter the characters.
1 Press (+) to select the desired
characters.
(A n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + n – n * n / n \ n > n <
n . n _ )
FM1
W
If you press (–), the characters appear
in the reverse order.
If you want to put a blank space
between characters, select "_" (under-
bar).
2 Press (SEL) after locating the desired
character.
The flashing cursor moves to the next
space.
FM1
W
If you press (SEL) when the eighth
character (farthest right character) is
flashing, the flashing part goes back to
the first character (farthest left
character).
3 Repeat steps 1 and 2 to enter the
entire name.
4
To return to the normal radio reception,
press (FILE) for two seconds.
Tip
To erase/correct a name, enter "_" (under-bar) for each
character.
Displaying the station name
Press (DSPL) during radio reception.
FM1
Each time you press (DSPL), the item
changes as follows:
z Station name* z Frequency z Clock
* If the station name is not stored, "NO NAME"
appears in the display for one second.
Erasing the station name
1
Tune in any station and press (FILE) for
two seconds.
2
Press (5) while pressing (SEL).
3
Press (+) or (–) to select the name that
you want to erase.
4
Press (SEL) for two seconds.
The name is erased.
Repeat steps 3 and 4 if you want to erase
other names.
5
Press (FILE) for two seconds.
The unit returns to the normal radio
reception mode.
EN
9