USING YOUR MEDIA PLAYER
1) Connect the included AUDIO ADAPTOR CABLE to the AUDIO IN JACK on the left of the console and the
headphone jack on your media player.
2) Use your media player buttons to adjust song settings.
3) Remove the AUDIO ADAPTOR CABLE when not in use.
ENERGY SAVER (STANDBY MODE)
This machine has a special feature called Energy Saver™ mode. This mode is NOT automatically activated.
When Energy Saver mode is activated, the display will automatically enter standby mode (Energy Saver mode) after
15 minutes of inactivity. This feature saves energy by disabling most power to the machine until a key is pressed on
the console. This feature can be turned on or off in the engineering menu.
To enter the engineering menu, press and hold the (+) LEVEL key and (–) LEVEL key for 3-5 seconds. Use the (-/+)
keys and ENTER key to navigate to P5 under ENG2. Press ENTER to select Energy Saver mode, use (-/+) keys to
select ENRGY SVE ON or OFF. Press and hold STOP for 3-5 seconds to exit ENG2. Press and hold STOP again for
3-5 seconds to exit the engineering menu.
AFG14_7.3AR_AU_OM_r1_5.indd 27
27
5/12/14 11:13 AM