011809 Bewegungsmelder PIR 240_011809 BA_Bewegungsmelder PIR 240 08.04.21 14:
Directions for use
Problem: Light stays on.
Possible Cause1:
Constant
false alarms
Possible Cause2:
Time set is too
long.
Problem: Light activates during the day.
Possible Cause:
Set LUX-setting dial
for daylight
Problem: Range decreases for settings in daylight.
Possible Cause:
Interference from
sun light
Important:
1. Clean the sensor lens off with a damp cloth every 3 months, so
that no dust accumulates and the correct function of the
motion detector is assured.
2. Do not perform any technical modifications on this product.
3. Infrared-motion detectors are more sensitive in cold, dry
weather than in warm, humid weather.
4. Do not turn the setting dial through more than 360°. Turn the
setting dial carefully until it stops and then back in the other
irection.
12
Suggested Solution:
Re-aiming the sensor can help
Suggested Solution:
Shorten duration
Suggested Solution:
Set LUX-setting dial to the
desired light level again.
Suggested Solution:
Perform settings and tests at night
PIR 240 IP44 V2