Makita XLC03 Manual De Instrucciones página 10

1
2
► 1 . HEPA filter 2. High performance filter
OPERATION
CAUTION:
Do not move your face close to the air
vent when operating the cleaner. If foreign objects are
blown into eyes, it may result in personal injury.
Installing or removing the cleaner
attachment
CAUTION:
After installing attachment,
check if it is securely installed. If the attachment
is installed imperfectly, it may come off and cause
personal injury.
CAUTION:
Be careful not to hit your hand on
the wall etc. when removing the attachment.
When using the extension wand with
lock function
To install the extension wand, insert it to the suction
inlet of the cleaner until it clicks. Make sure that the
extension wand is locked.
3
► 1 . Suction inlet 2. Extension wand 3. Hook
1
2
NOTE: When installing the extension wand, be
sure to align the release button with the hook
on the extension wand. If they are not aligned, the
wand will not be locked and may come off from the
cleaner.
NOTE: When installing the extension wand with-
out lock function (optional accessory), twist and
insert it to the suction inlet of the cleaner in direc-
tion of the arrow. To disconnect, twist and remove it
also in direction of the arrow.
To remove, pull the extension wand while pushing the
release button.
1
► 1 . Release button 2. Extension wand
When using the nozzle
CAUTION:
To connect the nozzle, twist and
insert it in direction of the arrow to secure the
connection during use. To disconnect the attach-
ment, twist and extract it also in direction of the
arrow. If the nozzle is twisted in the opposite direc-
tion, the capsule may become loose.
To install the nozzle, twist and insert it securely to the
suction inlet of the cleaner or the end of extension
wand. To disconnect, twist and remove it.
10 ENGLISH
2