Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
NOTE:
If false alarms keep coming from the detector, you should check whether the detector's location
is adequate. Refer to section "Where To Install Smoke and Heat Detectors." Have your
detector moved if it is not located properly. Clean the detector as described above.
After you re-mount the detector on its base, you must check the smoke alarm. To do this,
conduct a functional test as described in the Testing section of these instructions.
14
Figure 10: Battery Replacement
1 & 2-Way Smoke & Heat Detector
Publicidad
Tabla de contenido
