Subtitle Language; Camera Angle; Changing The On-Screen Display - Denon DVM-1815 Instrucciones De Operación

PLAYING A DISC

Subtitle Language

The DVD player allows you to select
a language for subtitle during DVD disc (if available) playback.
1
Press the SUBTITLE button during playback.
2
Press the SUBTITLE button repeatedly to select
your desired subtitle language.
• The selected language will be displayed on the display
bar at the top of the screen.
3
To turn off subtitles, press the SUBTITLE button
repeatedly until OFF appears.
1 ENG/6
2 FRE/6
OFF
NOTES:
• Some discs allow audio language setting/subtitle language
setting on the disc menu. (Operation varies between discs,
so refer to the manual accompanying the disc.)
• If the desired language is not shown after pressing the
SUBTITLE button several times, the disc does not have subtitles
in that language.
• If you choose a Language that has a 3 letter language
code, the code will be displayed every time you change the
Subtitle language setting. If you choose any other lan-
guages, '---' will be displayed instead. (Refer to page 26.)

Camera Angle

Some DVD discs contain scenes which have been shot simulta-
neously from various angles. You can change the camera angle
when the ( ) mark appears on the screen.
1 Press the ANGLE button during playback.
• The selected angle will be displayed on the display bar
at the top of the screen.
2 Press the ANGLE button repeatedly to select your
desired angle.
1 / 8
2 / 8
8 / 8
DVD-V
Subtitle 1
Subtitle 2
OFF
DVD-V
Angle 1
Angle 2
Angle 8
– 22 –

Changing the On-Screen Display

You can check information about the
current disc by pressing the DISPLAY button on the remote
control.
1
Press the DISPLAY button
once during playback to show
current Disc number.
• The current disc number will be
displayed.
2
Press the DISPLAY button
twice during playback to show
current Chapter.
• The elapsed and remaining play-
ing time of the current chapter
will be displayed.
3 Press the DISPLAY button
three times to show current
Title.
• The elapsed and remaining play-
ing time of the current title will be
displayed.
4
Press the DISPLAY button four times.
• The BIT RATE and the current repeat setting will be
displayed.
• If you are playing a dual layered disc, the layer number
will also be displayed ( L0: Layer 0 is playing. L1: Layer
1 is playing).
If you are playing a DVD-RW with
setting the PLAYLIST, the following
will also be displayed.
ORG: Playing the ORIGINAL.
PL: Playing the PLAYLIST.
5
Press the DISPLAY button five times to remove the
display.
CD
1
Press the DISPLAY button during playback, the
current Track will be displayed on the TV screen.
• The elapsed and remaining playing time of the current
track will be displayed.
2 Press the DISPLAY button again to show current
Total Track.
• The elapsed and remaining playing time of the current
total track will be displayed.
3 Press the DISPLAY button the third time to remove
the display.
DVD-V
DVD
9/49 0:00 00 0:00 00
1/5 0:00:00 0:00:00
IIII
T ORG
MP3 JPEG WMA
EN