Installation Guide - Wall | Standard Clamp Drain - ESS Easy Drain S-line Consejo Para La Instalación

INSTALLATION GUIDE WALL - CLAMP DRAIN
Manual de instalación
Explications de montage
1
OUTLET HOLE: DISTANCE TO WALL
A: 2 " (62 )
4/9
mm
B: 2 " (62 ) + WALL BOARD THICKNESS
4/9
mm
3
THE TOP OF THE CLAMP DRAIN MUST BE INSTALLED
AT LEAST ½ " ABOVE THE WOODEN FLOOR
5
7 A
SEAL THE ENTIRE FLOOR WITH PAN LINER
REMOVE AIR POCKETS BENEATH THE LINER
*NOTE: Clamp drain may vary depending on model being used
SLOPED MORTAR BED
2 CLAMP DRAIN* NOT INCLUDED
MAKE SURE THE CONNECTION BETWEEN THE CLAMP
DRAIN BASE AND SIPHON/DISCHARGE PIPE IS
WATERTIGHT!
4
6
PAN LINER WITH ADHESIVE BONDING
7 B
CONCRETE BOARD (AT LEAST ¼" ABOVE THE
FLOOR)
S-line 5