Faults - WIKA PSD-4-ECO Manual De Instrucciones

Presostato con display oem
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

6. Faults

6. Faults
CAUTION!
EN
Physical injuries and damage to property and the environment
If faults cannot be eliminated by means of the listed measures, the pressure switch must be taken out of
operation immediately.
WARNING!
Physical injuries and damage to property and the environment caused by hazardous media
Upon contact with hazardous media (e.g. oxygen), and also with refrigeration plants and compressors,
there is a danger of physical injuries and damage to property and the environment.
For contact details see chapter 1 "General information" or the back page of the operating instructions.
In the event of any faults, first check whether the pressure switch is mounted correctly, mechanically and electrically.
If complaint is unjustified, the handling costs will be charged.
22
Ensure that pressure or signal is no longer present and protect against accidental commissioning.
Contact the manufacturer.
If a return is needed, please follow the instructions given in chapter 8.2 "Return".
Should a failure occur, media with extremely high temperature and under high pressure or vacuum
may be present at the instrument.
For these media, in addition to all standard regulations, the appropriate existing codes or regulations
must also be followed.
Wear the requisite protective equipment.
WIKA operating instructions, model PSD-4-ECO

Publicidad

Tabla de contenido
loading

Tabla de contenido