Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
1
Rear cover
2
Battery Cartridge
3
Switch
4
Nozzle
5
Cleaner body
SPECIFICATIONS
Model
Capacity ................................................................500 ml
Continuous use
Battery 7000.................................High: Approx. 10 min.
Battery 7002.................................High: Approx. 15 min.
Overall length ......................................................383 mm
Net weight ..............................................................1.1 kg
Output ..............................................................D.C. 7.2 V
• Due to the continuing program of research and devel-
opment, the specifications herein are subject to change
without prior notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for collecting dry dust.
Safety hints
For your own safety, please refer to enclosed safety
instructions.
IMPORTANT SAFETY INSTRUCTIONS
FOR CHARGER & BATTERY CARTRIDGE
1.
Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using battery.
2.
Do not disassemble battery cartridge.
3.
If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4.
If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5.
Always cover the battery terminals with the bat-
tery cover when the battery cartridge is not
used.
6.
Do not short the battery cartridge:
(1) Do not touch the terminals with any conduc-
tive material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
(3) Do not expose battery cartridge to water or
rain.
A battery short can cause a large current flow,
overheating, possible burns and even a break-
down.
4
Explanation of general view
6
Extension wand (Straight pipe)
7
Corner nozzle
8
Front cover
9
Depress
10 Open
4073D
Low: Approx. 20 min.
Low: Approx. 30 min.
ENC004-1
11 Dust bag
12 Hook front cover onto front lip
13 Close
14 Front lip
7.
Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50°C (122°F).
8.
Do not incinerate the battery cartridge even if it
is severely damaged or is completely worn out.
The battery cartridge can explode in a fire.
9.
Be careful not to drop or strike battery.
SAVE THESE INSTRUCTIONS.
Tips for maintaining maximum battery life
1.
Charge the battery cartridge before completely
discharged.
Always stop tool operation and charge the bat-
tery cartridge when you notice less tool power.
2.
Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.
3.
Charge the battery cartridge with room tempera-
ture at 10°C – 40°C (50°F – 104°F). Let a hot bat-
tery cartridge cool down before charging it.
4.
Charge the Nickel Metal Hydride battery car-
tridge when you do not use it for more than six
months.
ADDITIONAL SAFETY RULES FOR CLEANER
1.
Do not pick up wet materials, lit cigarettes or the
like.
2.
Stop operation immediately if you notice any-
thing abnormal.
3.
If you drop or strike the cleaner, check it care-
fully for cracks or damage before operation.
4.
Do not charge the cleaner close to dangerous
flammable materials such as gasoline, gas, paint
or adhesives.
5.
Do not charge the cleaner on papers, cloth, car-
pet, vinyl, etc. This may cause a fire.
6.
Do not charge the cleaner in a dusty place.
7.
Be sure no one is below when using the cleaner
in high locations.
8.
Do not bring close to stoves or other heat
sources.
9.
Do not block the intake hole or vent holes.
SAVE THESE INSTRUCTIONS.
Publicidad
Tabla de contenido
