Singer 2263 Manual De Instrucciones página 7

1. NEEDLE THREADER LEVER is used to engage the automatic needle threader. (See Page 15)
2. THREAD TAKE-UP LEVER
3. THREAD CUTTER is conveniently located for trimming thread ends at the end of sewing.
4. PRESSER FOOT holds fabric against feed teeth, drawing fabric under the foot for you as you sew.
(See Page 26)
5. NEEDLE PLATE has guidelines to help you keep seams straight. (See Page 9)
6. REMOVABLE STORAGE COMPARTMENT
accessories, and provides access to the free arm. (See Page 10)
7. REVERSE SEWING LEVER reverses stitching direction, for example, when securing the beginning
and ending of a seam. (See Page 20)
8. BOBBIN WINDING STOPPER determines when bobbin is full and disengages automatically. (See
Page 12)
9. STITCH WIDTH DIAL controls the width of stitches, making them narrower or wider. (See Page 19)
10. STITCH LENGTH DIAL controls the length of stitches, making them shorter or longer as desired.
It is also used for stretch stitch length selection. (See Page 19)
11. STITCH SELECTOR DIAL is used to select stitch patterns and buttonhole settings. (See Page 19)
12. THREAD TENSION DIAL allows you to select just the right tension for your stitch, thread and
fabric. (See Page 18)
13. BOBBIN CASE holds the bobbin in the bobbin holder. The bobbin case is located behind the
hinged cover, accessible after taking off the removable storage compartment. (See Page 13)
14. BOBBIN holds the thread that forms the stitching that appears on the bottom side of the fabric.
(See Page 12)
ABOUT YOUR MACHINE
Main Parts of the Machine Front
1
13 14
7