Intended Use - DeWalt DCF887 Manual De Instrucciones

SAVE THESE INSTRUCTIONS
FOR FUTURE USE
DESCRIPTION (FIG. 2)
WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
A. Trigger switch
B. Forward/reverse button
C. Chuck collar
D. 1/4" (6.35 mm) hex
quick-release chuck
E. Battery release button
FIG. 2
G
C
D
G
A
K
E
F
F. Battery pack
G. Worklight
H. Belt hook (optional accessory)
I. Mounting screw
J. Main handle
K. Mode selector
B
J

INTENDED USE

These impact drivers are designed for professional impact screwdriving
applications. The impact function makes this tool particularly useful
for driving fasteners in wood, metal and concrete.
DO NOT use under wet conditions or in presence of flammable
liquids or gases.
These impact drivers are professional power tools. DO NOT let
children come into contact with the tool. Supervision is required when
inexperienced operators use this tool.
Belt Hook (Optional Accessory) (Fig. 2)
WARNING: To reduce the risk of serious personal injury,
place the forward/reverse button in the lock-off position
or turn tool off and disconnect battery pack before making
any adjustments or removing/installing attachments or
accessories. An accidental start-up can cause injury.
WARNING: Drop Hazard. To reduce the risk of serious
personal injury, DO NOT use the belt hook for tethering or securing
the tool to a person or object during use when elevated.
WARNING: To reduce the risk of serious personal injury, DO
NOT suspend tool overhead or suspend objects from the belt hook.
ONLY hang tool's belt hook from a work belt.
WARNING: To reduce the risk of serious personal injury,
ensure the screw holding the belt hook is secure.
IMPORTANT: When attaching or replacing the belt hook, use only
the screw (I) that is provided. Be sure to securely tighten the screw.
The belt hook (H) can be be attached to either side of the tool using
only the screw (I) provided, to accommodate left- or right- handed
users. If the hook is not desired at all, it can be removed from the tool.
H
To move belt hook, remove the screw (I) that holds the belt hook
in place then reassemble on the opposite side. Be sure to securely
tighten the screw.
I
38