Intended Use - DeWalt DCF889 Manual De Instrucciones

SAVE THESE INSTRUCTIONS
FOR FUTURE USE
DESCRIPTION (FIG. 2)
WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
A. Trigger switch
B. Forward/reverse button
C. Anvil
D. Main handle
FIG. 2
C
H
A
G
E
F
E. Battery release button
F. Battery pack
G. Worklight
H. Detent pin
B
D
35

INTENDED USE

This impact wrench is designed for professional impact fastening
applications. The impact function makes this tool particularly useful
for driving fasteners in wood, metal and concrete. DO NOT use under
wet conditions or in presence of fl ammable liquids or gases.
This impact wrench is a professional power tool. DO NOT let children
come into contact with the tool. Supervision is required when
inexperienced operators use this tool.
OPERATION
WARNING: Always observe the safety instructions and applicable
regulations.
WARNING: To reduce the risk of serious personal injury,
place the forward/reverse button in the lock-off position
or turn tool off and disconnect battery pack before making
any adjustments or removing/installing attachments or
accessories.
Installing and Removing the Battery Pack
(Fig. 3)
NOTE: For best results, make sure your battery pack is fully charged.
To install the battery pack (F) into the tool handle, align the battery
pack with the rails inside the tool's handle and slide it into the handle
until the battery pack is fi rmly seated in the tool and ensure that it does
not disengage.
To remove the battery pack from the tool, press the release button (E)
and fi rmly pull the battery pack out of the tool handle. Insert it into the
charger as described in the charger section of this manual.