Grundig MUSIC DG 8000 DAB+ Manual De Instrucciones página 24

TIMER MODE
Notes:
The alarm function is only available during
7
mains operation, it is disabled during battery
use.
You can select directly the option »ALARM«
7
also with »MODE/AL« in standby mode.
Setting the alarm times
1
Press »ON/OFF« to switch on the device.
– Display: e.g. »B5 AKT«.
2 Open the menu with »MENU«.
3 Select the option »SYSTEM« with »TUNING«
and confirm by pressing »SEL/ATS«.
4
Select the option »ALARM« with »TUNING«
and confirm by pressing »SEL/ATS«.
– Display: »ALARM« flash.
5 Press »SEL/ATS«, select Timer On (»ON«) with
»TUNING« and confirm by pressing
ATS«.
– Display: e.g. »6 : 00 AM«.
6
Set the hours with »TUNING« and confirm by
pressing »SEL/ATS«.
7
Set the minutes with »TUNING« and confirm
by pressing »SEL/ATS«.
8 Select the desired alarm mode (signal sound/
buzzer, DAB radio station or FM radio sta-
tion) with »TUNING« and confirm by pressing
»SEL/ATS«.
Note:
If DAB/ or FM program has been selected
7
as the alarm signal, a program must be se-
lected with »TUNING« and confirmed with
»SEL/ATS«.
9 Select the desired alarm day (Daily, Once,
Weekends or Weekdays) with »TUNING«.
Notes:
If the alarm is set to "Once" continue with
7
step 10.
Otherwise, end settings with step 13.
7
10 Set the day with »TUNING« and confirm by
pressing »SEL/ATS«.
24 ENGLISH
--------------------------------------------------------------------------------------------------------------------------
»SEL/
11
Set the month with »TUNING« and confirm
by pressing »SEL/ATS«.
12 Set the year with »TUNING«.
13
Press »SEL/ATS« to end the setting.
– Display: »SAVED«.
Interrupting the alarm
1 Press »SNOOZE« while the alarm is sounding.
– Display: »e« or »
– The alarm (signal tone or radio) stops.
– The alarm goes on again in 5-minute inter-
vals (the total alarm time is 90 minutes).
Cancelling alarm stand-by
1
Press »ON/OFF« while the alarm is sounding.
– Display: the current time and »e« or »
– The alarm (signal tone or radio) stops, but
the alarm function remains activated for the
next day at the same time.
Activating and deactivating the
alarm
1
Press »ON/OFF« to switch off the device.
2
Press »MODE/AL« to deactivate the alarm
stand-by.
– Display: »OFF« and »e« or »
pears.
– The set alarm time is saved
3
Press »MODE/AL« to reactivate the alarm
stand-by.
– Display: »ON« and »e« or »
§
« flash.
§
§
« disap-
§
«.
«.