Use; Device Overview; Operation - Intenso Q10000 Instrucciones De Uso

USE

Device overview

1

Operation

1. Function key
By briefly pressing the key, the current battery status is displayed through the LED lights and the
Powerbank is activated.
If no device is connected to the Powerbank, or the connected device is fully charged, the
Powerbank changes automatically into standby mode after a time interval of approx. 5 seconds.
2. LED Status display
The individual LEDs display the remaining energy of the Powerbank:
% Energy
1 % - 25 %
26 % - 50 %
51 % - 75%
76 % - 100 %
3. Commissioning / Charging the Powerbank / Charging connected Devices
a) Charging the Powerbank
Connect the supplied microUSB cable with the microUSB port (IN) of the Powerbank and connect
the other end of the USB cable with a standard USB port of a computer or USB power supply.
The charging process and the current charge status is signalled via the LED status lights When the
Powerbank is fully charged, the LED status lights are permanently on. The required charging time
of the Powerbank is dependent on the selected charging source and its output (max. 5V / 2.1A).
5
2 3 4
LED 1 LED 2
EN - Page 3 of 7
1 - Function key
2 - Status LEDs
3 - USB OUT
4 - USB QC OUT
5 - IN
LED light
LED 3 LED 4