Use; Device Overview - Intenso WPD10000 Manual Del Usuario

Any other use or use beyond what is specified is deemed as not intended use and can lead to
damages and injuries. This product is not intended for commercial use or for medical and spe-
cial applications, where the failure of the product can cause injuries, mortalities or considerable
material damages. Claims of any type for damages resulting from use other than for the intended
purpose or non-observance of the safety instructions are excluded.

USE

Device overview

1 - Function key (ON/OFF)
2 - USB 1 OUT
(Quick Charge)
3 - Type C OUT
(PD/Quick Charge)
4 - USB 2 Out
(Quick Charge)
5 - Status LEDs
6 - Wireless Charging Area
Operating
1. Function key (ON/OFF)
By briefly pressing, the current battery status is displayed through the LED lights and the wireless
charging function of the Powerbank is activated.
If there is no device connected to the Powerbank, or the connected device signals to the power
bank that it is entirely charged, the power bank will automatically switch to the standby mode after
a time interval of approximately 40 seconds.
2. LED status display
The individual LEDs display the remaining energy of the Powerbank:
% - energy
1 % - 25 %
26 % - 50 %
51 % - 75%
76 % - 100 %
3. Commissioning / Charging the Powerbank / Charging connected devices
a) Charging the Powerbank
Please connect the supplied cable Type C to the port Type C (Type C Out/In) of the Powerbank;
then connect the other end of the USB cable to a power supply Type C or to a port Type C on your
computer. The charging process and current charging status will be indicated by the LED status
lights. If the Powerbank is entirely charged, the LED status lights remain illuminated. The required
charging time of the Powerbank depends on the selected charging source and the output power.
5
/ IN
(PD)
1 2
LED 1 LED 2
EN - Page 3 of 8
3 4
LED light
LED 3
6
LED 4