VOX electronics МX-3001 Manual De Usuario página 5

USING YOUR MIXER
1. Choose appropriate beater and left and right dough hook, and then put
them into the mixer.
2. Beater is suitable for mixing liquid mixture and dough hooks apply to
knead the dough。
Note: Beaters can be inserted in either socket, as the beaters are identical.
For dough hooks, the one with washer can only be inserted into the big
socket and the other one can only be inserted into small socket. The two
dough hooks cannot be inserted in reverse. The size of the hole can be
judged by the diameter of the main unit bottom hole on the plane.
3. Turn the switch knob to 0 position and put the mixture into the bowl or
other objects and then plug in the power supply socket.（See Fig.1）
4. Turn the speed selector to your desired setting.
5. Operate with hand directly, and uniform effect only can be achieved when
bowl is in the case of movement.
6. The max operation time per time shall not exceed 5 minutes and minimum
10 minutes rest time must be maintained between two consecutive cycles.
7. When kneading yeast dough, suggest the speed selector first use a low
speed and then use high speed to achieve the best results.
8. When mixing is completed, turn the speed selector to 0 position, unplug
the cord from power outlet.（See Fig.2）
9. If necessary you can scrape the excess food particles from the beaters or
dough hooks by rubber or wooden spatula.
10. Hold the beaters/dough hooks with one hand and press the Ejector but-
ton firmly down with the other hand, remove the beater/dough hooks.