Operation; Cleaning And Care - Klarstein RESERVA 8 UNO Manual Del Usuario

EN
20

OPERATION

• As soon as the power is connected, the cooling system starts working. The
temperature is set to a specific position. When the temperature of the appliance
reaches the set point, the temperature control system stops the cooling system so
that the temperature in the cabinet gradually increases.
• When the internal temperature rises above the set point, the temperature control
system starts working again and the internal temperature is cooled down again.
• After you have set the temperature, the display will return to showing the
temperature inside the cabinet, but it may rotate to the point that you have set
gradually.

CLEANING AND CARE

Cleaning the Unit
• First switch off the unit and disconnect the power plug from the socket.
Remove the entire contents.
• Wash the interior with a damp cloth dipped in lukewarm water with a little
detergent.
• Make sure that the rubber seal on the door is clean so that the unit remains
powerful.
• The exterior of the wine refrigerator should be cleaned with a mild detergent.
• Dry the inside and outside with a soft cloth.
• Dust and anything else that blocks the exhaust air openings will reduce the cooling
capacity of the unit. If necessary, suck off the exhaust air opening.
Shutdown in absentia
• Turn off the unit first. Then disconnect the power plug.
• Remove the entire contents.
• Clean the unit.
• Keep the lid open slightly to prevent condensation, mould or odours.
Installation at another Location
• Turn off the unit first. Disconnect the power plug.
• Remove the entire contents.
• Secure all loose objects with adhesive tape.
• Tape the doors shut.