DESCRIPTION OF THE VACUUM CLEANER
List of parts
1.
Carrying handle
2.
Opening for inserting the hose
3.
The full dust bag indicator
4.
Front cover
5.
Cable rewind button
6.
Rear filter cover
USING THE VACUUM CLEANER
The vacuum cleaner must be switched off and unplugged prior to assembly!
1. Insert the end of the hose in the opening in front of the vacuum cleaner and secure.
2. Connect the other end of the hose with curved ending to the tube.
3. Attach to the tube accessories suitable for the flooring type. Switch the brush nozzle for carpets or for
hard floors according to the type of floor. The combined nozzle is designed for cleaning narrow spces and
difficult to reach areas in the corners or between the furniture.
4. Starting the vacuum cleaner: plug the power cable in the electrical outlet whose parameters correspond to
the data in the type tag of the vacuum cleaner and press the power button to start the vacuum cleaner.
5. Pulling and rewinding the cord: Grasp the plug and pull out the power cord. Press the retractor button, the
power cord rewinds back in the vacuum cleaner.
Note: Never pull out the power cord beyond the red mark located on the cord. The yellow mark shows the
optimum length of the power cord.
Note: When carrying the appliance from one room to another unplug the power cord and carry it by the
handle. Never move the vacuum cleaner by pulling the power cord.
qa
0
4
qs
2
7.
Holder to park the nozzle
8.
ON/OFF button
9.
Wheels
10. Tube
11. Hose
12. Combined nozzle
5
3
1
7
8
6
GB
9
27